The Groove is our smallest outdoor series model - a fully featured RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built-in 500mW 802.11b/g/n wireless radio. With the Nv2 TDMA technology, 125Mbit aggregate throughput is possible, limited only by the ethernet port!

The Groove 2Hn has a RouterOS Level3 license, so you can use it as a wireless client or for point to point links.

It has a built-in N-male connector, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.

The Groove runs RouterOS with all its features.

Product Links:
Brochure

Technical Specification:

SXTG is a low cost, high speed 5GHz outdoor wireless device, with a Gigabit port, to fully utilize the capacity of 802.11n. SXTG can be used for point to point links or as a CPE for point to multipoint installations.

Complete with a ready to mount enclosure and built-in 16dBi antenna, the package contains everything you need to make a point to point link, or connect to an AP.

RouterBOARD SXT features:

• Solid all-in-one design: quick and easy to mount
• Tower friendly one hand enclosure access
• 5GHz 802.11a/n wireless onboard
• One 10/100/1000 Gigabit Ethernet port
• 16dBi dual chain antenna built-in
• Signal strength LED indicators on back
• USB 2.0 port, voltage and temperature monitors
• Extended L2MTU support to avoid fragmentation overhead in MPLS, QinQ etc.

Product Links:
Brochure	Support Page	Documentation

SEXTANT - Outdoor point to point solution

The SEXTANT is a 18dBi 5GHz antenna with a built in RB711 router. It has two polarizations to give you all benefits of 2x2 MIMO in 802.11n. The new SEXTANT is very similar to the popular SXT unit, just slightly bigger. Inside is the brand new RB711-5HnD dual chain wireless device, with high performance, high output power, and low power requirements. Easy to use and quick to deploy, SEXTANT is ideal for point to point links.

Features:

• CPU: Atheros AR7241 400MHz network processor
• 32MB DDR SDRAM onboard memory
• Data storage: 64MB onboard NAND memory chip
• 5GHz AR9280 802.11a/n, 2x2 MIMO, 2x MMCX

Specification:

SXT Sixpack

OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas - the perfect companion for the SXT, or for any other 5GHz 802.11a/n standard device. Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 400mW 802.11a/n wireless radio. Full RouterOS feature set to control all networking in your tower.

SXT is a low cost, high speed 5GHz wireless device. It has a dual chain antenna and supports 802.11n and Nv2 TDMA technology to achieve 200Mbit throughput speed! Complete with a ready to mount enclosure and built-in antenna, this is the perfect CPE! With SXT, connect from up to 5Km to the OmniTIK AP.

We are now offering the OmniTIK bundled with FIVE SXT client devices -for the price of five SXT units, you get a complete kit.

OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas - the perfect companion for our SXT, or for any other 5GHz 802.11a/n standard device.

Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 400mW 802.11a/n wireless radio.

It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.

LED signal indicators on it’s back are fully customisable, show Ethernet activity or wireless signal - or any other information from RouterOS.

The USB port gives the ability to connect a 3G modem or a storage drive.

The OmniTIK runs RouterOS with all it’s features.

Σύνδεσμοι Προϊόντος:
Brochure

The Groove is our smallest outdoor series model - a fully featured RouterBOARD powered by RouterOS.

Weatherproof, durable and ready to use.

It has one 10/100 Ethernet port with PoE support and a built-in 200mW 802.11a/n wireless radio.

With the Nv2 TDMA technology, 100Mbit full duplex throughput is possible, limited only by the ethernet port!

The Groove 5Hn has a RouterOS Level3 license, so you can use it as a wireless client or for point to point links.

It has a built-in N-male connector, so you can attach it to an antenna directly, or use a standard antenna cable.

LED signal indicators make it easy to install and align.

The Groove runs RouterOS with all it’s features.

Product Links:
Brochure

The Groove is our smallest outdoor series model - a fully featured RouterBOARD powered by RouterOS.

Weatherproof, durable and ready to use.

It has one 10/100 Ethernet port with PoE support and a built-in 200mW 802.11a/n wireless radio.

With the Nv2 TDMA technology, 100Mbit full duplex throughput is possible, limited only by the ethernet port!

The Groove A-5Hn has a RouterOS Level4 license, so you can use it as a wireless access point (or as a client and for point to point links).

It has a built-in N-male connector, so you can attach it to an antenna directly, or use a standard antenna cable.

LED signal indicators make it easy to install and align.

The Groove runs RouterOS with all it’s features.

Product Links:
Brochure

Patent Pending InnerFeed™ Antenna Technology

Provides breakthrough MIMO antenna cost/performance. Higher Antenna Gain and even more cost-effective.

Compact and Robust Product Design

Very small visible footprint. Mechanical design provides complete weatherproof performance. Activity and signal strength LED's provided for installers. Enhanced RF and Ethernet ESD/Surge protection enables prolonged operation in harshest environments.

Breakthrough Wireless Performance, AirMax and AirControl Support

150+Mbps of real outdoor throughput and up to 20km+ range. NanoBridge M products utilize Ubiquiti's revolutionary AirMax™ TDMA protocol enabling scalable, carrier-class PtMP network performance. Additionally, AirControl™ application allows operators to centrally manage 100's of devices.

Product Links:
Datasheet	Installation Guide	Manual	Support Page
Product Page

System Information :
Processor Specs	Atheros MIPS 24KC, 400MHz
Memory Information	32MB SDRAM, 8MB Flash
Networking Interface	1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Regulatory / Compliance information :
Wireless Approvals	FCC Part 15.247, IC RS210, CE
RoHS Compliance	YES
Physical - Electrical - Environmental :
Dimensions	420mm diameter (25dBi)
Weight	135g (feed), 680g(bracket),750g(dish)
Enclosure Characteristics	Outdoor UV Stabalized Plastic
Mounting Kit	Pole Mounting Kit included
Max Power Consumption	5.5 Watts
Power Supply	24V Carrier POE Adapter Included (POE-24)
Power Method	Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Operating Temperature	-30C to +75C
Operating Humidity	5 to 95% Condensing
Shock and Vibration	ETSI300-019-1.4
Antenna Gain	25dBi

Ubiquity PicoStation M2 HP - 1x LAN, 32 MB RAM, 800mW output power!, 6 dBi omni antenna (2.4 GHz)

Features

PicoStation M2-HP combines speed, built to the latest 802.11n technology, high power output to 800 MW and with an incredibly small size which fits really everywhere!

The package includes 15 V PoE power supply with cable (230 V), 6 dBi omni antenna, mount on the wall and fastening strips for attaching the device to the mast. Equipment includes a very popular system AirOS. In Bridge mode and WDS device supports IPv6 transparently transfers.

Specifications

Operation mode AP, Client, WDS
Frequence 2412 - 2462 MHz
DHCP yes
Transmission speed 1, 2, 6, 11, 24 ,36, 48, 54 Mbps
Standards 802.11 g/n
Chipset Atheros
Output for an external antenna rev. SMA male
TX Power regulation yes - by 1 dB
Max.output power 28 dBm
Sensitivity -95 (1 mbps) to -72 (54 mbps) dBm
Modulation DSSS, OFDM
Encryption WEP 64, WEP 128, WPA, WPA2, 802.1X
Comformity FCC, CE
LAN port 1x RJ45 10/100 Mbps
Default IP 192.168.1.20
Default name ubnt
Default password ubnt
Power supply 12 -24V, 1 A (injector inside)
Operational temperature -20 to 70 °C
Dimension 150 x 42 x 40 mm (exluding antenna)
Weight 0,1 kg
Supported OS AirOS
Gain external omni 6 dBi antenna
Procesor MIPS 400 MHz
RAM 32 MB
NAND 8 MB

Product Links:
Datasheet

Patent Pending InnerFeed™ Antenna Technology                                  New 24 Volt PoE Version !!!

Utilizing InnerFeed technology, the new AirGrid M Series represents the evolution of outdoor broadband wireless devices. Complete antenna and radio system intergration provides revolutionary cost/performance solutions to the Worldwide Broadband Industry.

Robust and Simple Product Design

Can be oriented to use either vertical or horizontal polarization. Mechanical design provides complete weatherproof performance. Acitivity and signal strength LED's provided for installers. Enhanced RF and Ethernet ESD/Surge protection enables prolonged operation in harshest environments.

Breakthrough Wireless Performance, AirMax and AirControl Support

100+Mbps of real outdoor throughput and up to 30km+ range. AirGrid products utilize Ubiquiti's revolutionary AirMax™ TDMA protocol enabling scalable, carrier-class PtMP network performance. Additionally, AirControl™ application allows operators to centrally manage 100's of devices.

Product Links:
Datasheet	Installation Guide	Polarization Guide	Manual
Support Page	Product Page

System Information :
Processor Specs	Atheros MIPS 24KC, 400MHz
Memory Information	32MB SDRAM, 8MB Flash
Networking Interface	2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Regulatory / Compliance information :
Wireless Approvals	FCC Part 15.247, IC RS210, CE
RoHS Compliance	YES
Physical - Electrical - Environmental :
Grid Size	28cm x 36cm (11"x14")
Weight	0.2Kg Feed, 0.65kg mount, 0.8kg reflector
Mounting Kit	Pole Mounting Kit included
Max Power Consumption	3.0 Watts
Power Supply	24V Carrier POE Adapter Included (POE-24)
Power Method	Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Operating Temperature	-30C to +80C
Operating Humidity	5 to 95% Condensing
Shock and Vibration	ETSI300-019-1.4

SXT 5HnD is a low cost, high speed 5GHz wireless device. Dual chain 802.11n and Nv2 TDMA technology help to achieve even 200Mbit real throughput speed.

Complete with a ready to mount enclosure and built-in antenna, this is the perfect CPE.

Powered by RouterOS it is also the most advanced router, bandwidth controller and firewall.

RouterBOARD SXT
- Solid all-in-one design: quick and easy to mount
- Tower friendly one hand enclosure access
- 5GHz 802.11a/n wireless onboard
- One 10/100 Ethernet port
- 16dBi dual chain antenna built-in
- Signal strength LED indicators on back
- USB 2.0 port, voltage and temperature monitors
- Extended L2MTU support to avoid fragmentation overhead in MPLS, QinQ etc.

Product Links:
Product Page	Brochure	RouterBoot	User Guide
Quick Guide

Technical Details :
Product code	RB/SXT
Antenna gain	16dBi (+/- 2)
TX power	26dBm max
CPU speed	400MHz
RAM	32MB
Architecture	MIPS-BE
LAN ports	1
Gigabit	No
MiniPCI	0
miniPCI-e	0
Integrated Wireless	Yes
Wireless standards	802.11 a/n
USB	1
Memory Cards	0
Power Jack	No
PoE over Datalines	No
PoE	Yes
Voltage Monitor	Yes
Temperature sensor	Yes
Dimensions	140x140x56mm, 265g
Operating System	RouterOS
Temperature range	-30C to +80C
RouterOS License	Level3

Performance Breakthrough
150+ Mbps real outdoor throughput and up to 15km+ range. Featuring 2x2 MIMO technology, the new Nanostation links significantly faster and farther than ever before.

New Leading-Edge Industrial Design
The original NanoStation set the bar for the world's first low-cost and efficiently designed outdoor broadband CPE. The new NanoStation Loco M take the same concept to the future with new redesigned sleek and elegant form-factors.

The device designed to advance the Global Wireless ISP industry to the next level. Featuring a compact indoor/outdoor design and an interface so intuitive even the most technically challenged can instantly become experts.

But, don't be fooled; it is as powerful as it is simple. Nanostation packs some phenomenal performance with a revolutionary design combining a hi-gain antenna system, advanced radio architecture, and highly researched and developed firmware technology allowing throughput, stability, and capacity performance rivaling even the highest-end WiMax networks.

Product Links:
Datasheet	Manual	Support Page

System Information :
Processor Specs	Atheros MIPS 24KC, 400MHz
Memory Information	32MB SDRAM, 8MB Flash
Networking Interface	10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Physical - Electrical - Environmental :
Antenna	Integrated MIMO 2x2 8dBi Dual Pol Antenna
TX Power	23dBm, +/-2dB
RX Sensitivity	-96dBm +/-2dB
Outdoor Range	Over 15Km
TCP/IP Throughput	150Mbps+
Enclosure Size	163 x 80 x 31mm
Weight	0.18Kgr
Enclosure Characteristics	Outdoor UV Stabalized Plastic
Mounting Kit	Pole Mounting Kit included
Max Power Consumption	5.5 Watts
Power Supply	24V, 0.5A Surge protection integraded POE adapter included
Power Method	Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Operating Temperature	-23C to 80C
Operating Humidity	5 to 95% Condensing
Shock and Vibration	ETSI300-019-1.4
Wireless Approvals	FCC Part 15.247, IC RS210, CE
ROHS	Yes

Performance Breakthrough
150+ Mbps real outdoor throughput and up to 15km+ range. Featuring 2x2 MIMO technology, the new Nanostation links significantly faster and farther than ever before.

New Leading-Edge Industrial Design
The original NanoStation set the bar for the world's first low-cost and efficiently designed outdoor broadband CPE. The new NanoStation Loco M take the same concept to the future with new redesigned sleek and elegant form-factors.

The device designed to advance the Global Wireless ISP industry to the next level. Featuring a compact indoor/outdoor design and an interface so intuitive even the most technically challenged can instantly become experts.

But, don't be fooled; it is as powerful as it is simple. Nanostation packs some phenomenal performance with a revolutionary design combining a hi-gain antenna system, advanced radio architecture, and highly researched and developed firmware technology allowing throughput, stability, and capacity performance rivaling even the highest-end WiMax networks.

Product Links:
Datasheet	Manual	Support Page

System Information :
Processor Specs	Atheros MIPS 24KC, 400MHz
Memory Information	32MB SDRAM, 8MB Flash
Networking Interface	10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Physical - Electrical - Environmental :
Operating Frequency	5470MHz-5825MHz
Antenna	Integrated MIMO 2x2 13dBi Dual Pol Antenna
TX Power	23dBm, +/-2dB
RX Sensitivity	-96dBm +/-2dB
Outdoor Range	Over 15Km
TCP/IP Throughput	150Mbps+
Enclosure Size	163 x 80 x 31mm
Weight	0.18Kgr
Enclosure Characteristics	Outdoor UV Stabalized Plastic
Mounting Kit	Pole Mounting Kit included
Max Power Consumption	5.5 Watts
Power Supply	24V, 0.5A Surge protection integraded POE adapter included
Power Method	Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Operating Temperature	-23C to 80C
Operating Humidity	5 to 95% Condensing
Shock and Vibration	ETSI300-019-1.4
Wireless Approvals	FCC Part 15.247, IC RS210, CE
ROHS	Yes

PowerBridge M5: Carrier Class 5GHz MIMO Bridging Solution

Breakthrough Wireless Performance, AirMax & AirControl Support:
150+Mbps of real outdoor throughput and up to 20km+ range. PowerBridge M products utilize Ubiquiti's revolutionary AirMax™ TDMA protocol enabling scalable, carrier-class PtMP network performance. Additionally, AirControl™ application allows operators to centrally manage 100's of devices.

Advanced Antenna Technology:
Super-Efficient 25dBi Dual-Polarity Array Panel Design provides optimum MIMO performance at long distances.

Robust, Efficient Mechanical Design:
PowerBridge packs revolutionary performance in a compact and weatherproof design.

PowerBridge M5  is a versatile open architecture 802.11a/n based outdoor wireless platform that can be used as an AP, Bridge, PMP Station, Mesh networking client, and in many more applications being developed.

It features exceptional radio and antenna design which allows links to be established over distances of 50km and can provide significantly increased throughput (up to 150+Mbps TCP/IP) over other solutions in comparable environments.

Additionally, Ubiquiti has made public Linux SDK and toolchain resources for developers.

PowerBridge M5 comes with an embedded Super-Efficient 25dBi MIMO Antenna Array

Product Links:
Datasheet	Manual	Support Page

System Information :
Processor Specs	Atheros MIPS 24KC, 400MHz
Memory Information	32MB SDRAM, 8MB Flash
Networking Interface	10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Physical - Electrical - Environmental :
Operating Frequency	4.9-6.0 GHz
Antenna	Integrated MIMO 2x2, 24.8-26.5 dBi Dual Pol Antenna
TX Power	27dBm, +/-2dB
RX Sensitivity	-96dBm +/-2dB
Outdoor Range	Over 50Km
TCP/IP Throughput	150Mbps+
Enclosure Size	445 x 416 x 34mm
Weight	3.82kg
Enclosure Characteristics	Outdoor UV Stabalized Plastic
Mounting Kit	Pole Mounting Kit included
Max Power Consumption	8 Watts
Power Supply	24V, 1A Surge protection integraded POE adapter included
Power Method	Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Operating Temperature	-23C to 80C
Operating Humidity	5 to 95% Condensing
Shock and Vibration	ETSI300-019-1.4
Wireless Approvals	FCC Part 15.247, IC RS210, CE
ROHS	Yes

Product Links:
Datasheet	Polarization guide

Features

AirGrid M2 is a complete outdoor unit including a 20 dBi antenna for 2.4 GHz band, suitable for remote clients. Unit allows real communication speeds up to 100 Mbps.

For high speed transmission unit uses standard 802.11 and in the case of use as a client unit also supports AirMAX (TDMA) to connect to AP with low latency. The unit can also operate against AP supports only standard 802.11g. Antenna system uses patented technology to achieve the best InnerFeed properties while maintaining a good price.

Web-based configuration is very simple and clear. Can be set as:

- AP mode, client or WDS - Traffic shaping - QoS - Between WAN and LAN routing and transparent bridge without NAT or NAT - Signal strength, which is suited to the specific signaling LED

In bridge mode and WDS device supports transparent transmission of IPv6.

Included is a USB PoE injector, through which you can directly drive power. Use a different way can be 24 V power supply with passive PoE injector.

Specifications

Operation mode AP, Client, WDS
Frequence 2412 - 2462 MHz
DHCP yes
Transmission speed 150 Mbps
Standards 802.11g/n
Chipset Atheros
Output for an external antenna no
TX Power regulation yes
Max.output power 20 dBm
Sensitivity -97 dBm
Modulation OFDM, BPSK, QPSK, QAM
Encryption WEP, WPA, WPA2
Comformity FCC, CE
LAN port 1x RJ45 10/100 Mbps
Default IP 192.168.1.20
Default name ubnt
Default password ubnt
Power supply 24 V - PoE, USB
Operational temperature -30 up to 75 °C
Dimension 540 x 380 x 160 mm
IPSec Transparent (bridge mode)
Supported OS AirOS V
Gain 20 dBi
Polarization H/V
Procesor MIPS 4KC, 400 MHz
RAM 32 MB
NAND 8 MB

Product Links:
Datasheet	Polarization guide

Features

AirGrid M2 is a complete outdoor unit including 16 dBi antennas for 2.4 GHz band, suitable for remote clients. Unit allows real communication speeds up to 100 Mbps.

For high speed transmission unit uses standard 802.11nav the case of use as a client unit also supports AirMAX (TDMA) to connect to AP with low latency. The unit can also operate against AP supporting the only standard 802.11g. Antenna system uses patented technology to achieve the best InnerFeed properties while maintaining a good price.

Web-based configuration is very simple and clear. Can be set as:

- AP mode, client or WDS - Traffic shaping - QoS - Between WAN and LAN routing and transparent bridge without NAT or NAT - Signal strength, which is suited to the specific signaling LED

In bridge mode and WDS device supports transparent transmission of IPv6.

Included is a USB PoE injector, through which you can directly drive power. Use a different way can be 24 V power supply with passive PoE injector.

Specifications

Operation mode AP, Client, WDS
Frequence 2412 - 2462 MHz
DHCP yes
Transmission speed 150 Mbps
Standards 802.11g/n
Chipset Atheros
Output for an external antenna no
TX Power regulation yes
Max.output power 20 dBm
Sensitivity -97 dBm
Modulation OFDM, BPSK, QPSK, QAM
Encryption WEP, WPA, WPA2
Comformity FCC, CE
LAN port 1x RJ45 10/100 Mbps
Default IP 192.168.1.20
Default name ubnt
Default password ubnt
Power supply 24 V - PoE, USB
Operational temperature -30 up to 75 °C
Dimension 320 x 250 x 160 mm
IPSec Transparent (bridge mode)
Supported OS AirOS V
Gain 16 dBi
Polarization H/V
Procesor MIPS 4KC, 400 MHz
RAM 32 MB
NAND 8 MB

Features

Breakthrough Wireless Performance, AirMax and AirControl Support

150+ Mbps of real outdoor throughput and up to 20km+ range. NanoBridge M products utilize Ubiquiti' s revolutionary AirMax™ TDMA protocol enabling scalable, carrier-class PtMP network performance. Additionally, AirControl™ application allows operators to centrally manage 100' s of devices.

Specifications

SYSTEM INFORMATION
Processor Specs Atheros MIPS 24KC, 400MHz
Memory Information 32MB SDRAM, 8MB Flash
Networking Interface 1 X 10/ 100 BASE-TX ( Cat. 5, RJ-45) Ethernet Interface

PHYSICAL / ELECTRICAL / ENVIRONMENTAL
2GHz 11n
2GHz 11n
Enclosure Size 241x326x326 mm
Weight 135g ( feed) , 680g( bracket) , 610g( dish)
Enclosure Characteristics Outdoor UV Stabalized Plastic
Mounting Kit Pole Mounting Kit included
Max Power Consumption 5.5 Watts
Power Supply 24V Carrier POE Adapter Included ( POE-24)
Power Method Passive Power over Ethernet ( pairs 4, 5+ ; 7, 8 return)
Operating Temperature -30C to 75C
Operating Humidity 5 to 95% Condensing
Shock and Vibration ETSI300-019-1.4

Product Links:
Datasheet

Ultimate in RF Performance :
The Rocket is a rugged, hi-power, very linear 2x2 MIMO radio with enhanced receiver performance. It features incredible range performance (50+km) and breakthrough speed (150+Mbps real TCPI/IP). The device was specifically designed for outdoor PtP bridging and PTMP Airmax base-station applications.

Rocket M Seamlessly Integrates with AirMax BaseStation and Rocket Antennas:
Rocket M and AirMax BaseStation/Rocket Antennas have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the Antennas.

AirOS V:
Version 5 of Ubiquiti's AirOS builds upon the market leading intuitive user-interface loaded with advanced wireless configurations and routing functionality.

Product Links:
Datasheet	Manual	Support Page	Product Page

System Information :
Processor Specs	Atheros MIPS 24KC, 400MHz
Memory Information	64MB SDRAM, 8MB Flash
Networking Interface	2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Regulatory / Compliance information :
Wireless Approvals	FCC Part 15.247, IC RS210, CE
RoHS Compliance	YES
Physical - Electrical - Environmental :
Enclosure Size	16cm length x 8cm width x 3cm height
Weight	0.5 kg
RF Connector	2x RPSMA (Waterproof)
Enclosure Characteristics	Outdoor UV Stabalized Plastic
Mounting Kit	Pole Mounting Kit included
Max Power Consumption	6.5 Watts
Power Supply	24V, 1A POE Supply Included
Power Method	Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Operating Temperature	-30C to 75C
Operating Humidity	5 to 95% Condensing
Shock and Vibration	ETSI300-019-1.4

The device designed to advance the Global Wireless ISP industry to the next level. Featuring a compact indoor/outdoor design and an interface so intuitive even the most technically challenged can instantly become experts.

But, don't be fooled; it is as powerful as it is simple. Nanostation packs some phenomenal performance with a revolutionary design combining a hi-gain antenna system, advanced radio architecture, and highly researched and developed firmware technology allowing throughput, stability, and capacity performance rivaling even the highest-end WiMax networks.

Product Links:
Datasheet	Manual	Support Page

Live Demo
(login: ubntdemo)

System Information :
Processor Specs	Atheros AR2316 SOC, MIPS 4KC, 180MHz
Memory Information	16MB SDRAM, 4MB Flash
Networking Interface	10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Physical - Electrical - Environmental :
Antenna	Integrated 8dBi Dual Pol
TX Power	20dBm, +/-1dB
RX Sensitivity	-95dBm +/-1dB
Outdoor Range	Over 5Km
TCP/IP Throughput	25Mbps+
Enclosure Size	16.3 x 8 x 3.1cm
Weight	0.18Kgr
Enclosure Characteristics	Outdoor UV Stabalized Plastic
Mounting Kit	Pole Mounting Kit included
Max Power Consumption	4 Watts
Power Supply	12V, 1A (12 Watts). Supply and injector included
Power Method	Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Operating Temperature	-20C to 70C
Operating Humidity	5 to 95% Condensing
Shock and Vibration	ETSI300-019-1.4

Patent Pending InnerFeed™ Antenna Technology

Provides breakthrough MIMO antenna cost/performance. Higher Antenna Gain and even more cost-effective.

Compact and Robust Product Design

Very small visible footprint. Mechanical design provides complete weatherproof performance. Activity and signal strength LED's provided for installers. Enhanced RF and Ethernet ESD/Surge protection enables prolonged operation in harshest environments.

Breakthrough Wireless Performance, AirMax and AirControl Support

150+Mbps of real outdoor throughput and up to 20km+ range. NanoBridge M products utilize Ubiquiti's revolutionary AirMax™ TDMA protocol enabling scalable, carrier-class PtMP network performance. Additionally, AirControl™ application allows operators to centrally manage 100's of devices.

Product Links:
Datasheet	Manual	Support Page	Product Page

System Information :
Processor Specs	Atheros MIPS 24KC, 400MHz
Memory Information	32MB SDRAM, 8MB Flash
Networking Interface	2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Regulatory / Compliance information :
Wireless Approvals	FCC Part 15.247, IC RS210, CE
RoHS Compliance	YES
Physical - Electrical - Environmental :
Enclosure Size	241x326x326 mm
Weight	135g (feed), 680g(bracket),610g(dish)
Enclosure Characteristics	Outdoor UV Stabalized Plastic
Mounting Kit	Pole Mounting Kit included
Max Power Consumption	5.5 Watts
Power Supply	24V Carrier POE Adapter Included (POE-24)
Power Method	Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Operating Temperature	-30C to +80C
Operating Humidity	5 to 95% Condensing
Shock and Vibration	ETSI300-019-1.4

Performance Breakthrough :
150+ Mbps real outdoor throughput and up to 15km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.

New Leading-Edge Industrial Design:
The original NanoStation set the bar for the world's first low-cost and efficiently designed outdoor broadband CPE. The new NanoStation M and NanoStation Loco M take the same concept to the future with new redesigned sleek and elegant form-factors.

Next-Gen Antenna Design:
New antenna array designs featuring 11dBi dual-polarity 11dBi at 2.4GHz wtih optimized cross-polarity isolation and in a compact form-factor.

Dual Ethernet Connectivity:
The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.

Intelligent POE:
Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location. In addition, any NanoStation can easily become 802.3af 48V compliant through use of Ubiquiti's Instant 802.3af adapter.

AirOS V:
Version 5 of Ubiquiti's AirOS builds upon the market leading intuitive user-interface loaded with advanced wireless configurations and routing functionality.

Product Links:
Datasheet	Manual	Support Page	Product Page

System Information :
Processor Specs	Atheros MIPS 24KC, 400MHz
Memory Information	32MB SDRAM, 8MB Flash
Networking Interface	2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Regulatory / Compliance information :
Wireless Approvals	FCC Part 15.247, IC RS210, CE
RoHS Compliance	YES
Physical - Electrical - Environmental :
Enclosure Size	29.4 cm x 8 cm x 3cm
Weight	0.4kg
Enclosure Characteristics	Outdoor UV Stabalized Plastic
Mounting Kit	Pole Mounting Kit included
Max Power Consumption	8 Watts
Power Supply	15V, 0.8A surge portection integrated POE adapter included
Power Method	Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Operating Temperature	-30C to +80C
Operating Humidity	5 to 95% Condensing
Shock and Vibration	ETSI300-019-1.4
INTEGRATED 2x2 MIMO ANTENNA :
Frequency Range	2.32-2.55 GHz
Gain	10.4-11.2 dBi
Polarization	Dual Linear
Cross-pol Isolation	23dB minimum
Max VSWR	1.6:1
H-pol Beamwidth	55 deg.
V-pol Beamwidth	53 deg.
Elevation Beamwidth	27 deg.

Patent Pending InnerFeed™ Antenna Technology                                  POE Adapter Included (not just USB)

Utilizing InnerFeed technology, the new AirGrid M Series represents the evolution of outdoor broadband wireless devices. Complete antenna and radio system intergration provides revolutionary cost/performance solutions to the Worldwide Broadband Industry.

Robust and Simple Product Design

Can be oriented to use either vertical or horizontal polarization. Mechanical design provides complete weatherproof performance. Acitivity and signal strength LED's provided for installers. Enhanced RF and Ethernet ESD/Surge protection enables prolonged operation in harshest environments.

Breakthrough Wireless Performance, AirMax and AirControl Support

100+Mbps of real outdoor throughput and up to 30km+ range. AirGrid products utilize Ubiquiti's revolutionary AirMax™ TDMA protocol enabling scalable, carrier-class PtMP network performance. Additionally, AirControl™ application allows operators to centrally manage 100's of devices.

Product Links:
Datasheet	Installation Guide	Polarization Guide	Manual
Support Page	Product Page

System Information :
Processor Specs	Atheros MIPS 24KC, 400MHz
Memory Information	32MB SDRAM, 8MB Flash
Networking Interface	2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Regulatory / Compliance information :
Wireless Approvals	FCC Part 15.247, IC RS210, CE
RoHS Compliance	YES
Physical - Electrical - Environmental :
Grid Size	43cm x 61cm (17"x24")
Weight	0.65kg mount, 1.9kg reflector
Mounting Kit	Pole Mounting Kit included
Max Power Consumption	3.0 Watts
Power Supply	24V Carrier POE Adapter Included (POE-24)
Power Method	Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Operating Temperature	-30C to +80C
Operating Humidity	5 to 95% Condensing
Shock and Vibration	ETSI300-019-1.4

World Class Antenna Designs :
Patent-pending next-generation technology achieves gain, cross-pol isolation, and beamshaping characteristics rivaling the highest quality cellular carrier basestation antennas in the world. Instantly pair with Rocket M5 to create a powerful AirMax 2x2 MIMO PtMP BaseStation. Rocket mount and weatherproof RF jumpers included.

Rocket M Seamlessly Integrates with AirMax BaseStation Sectors:
Rocket M and AirMax BaseStation/Rocket Antennas have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the Antennas.

Product Links:
Datasheet	Product Page

Antenna and Electrical characteristics
Frequency Range	5.15-5.85 GHz
Gain	16.1-17.1 dBi
Polarization	Dual Linear
Cross-Pol Isolation	22dB min
Max VSWR	1.5:1
Hpol Beamwidth (6dB)	72 deg.
Vpol Beamwidth (6db)	93 deg.
Elevation Beamwidth	8 deg.
Electrical Downtilt	4 deg.
ETSI Specification	EN302 326 DN2
Dimensions	367x63x41mm
Weight	1.1Kgr
Windloading	120mph

World Class Antenna Designs :
Patent-pending next-generation technology achieves gain, cross-pol isolation, and beamshaping characteristics rivaling the highest quality cellular carrier basestation antennas in the world. Instantly pair with Rocket M5 to create a powerful AirMax 2x2 MIMO PtMP BaseStation. Rocket mount and weatherproof RF jumpers included.

Rocket M Seamlessly Integrates with AirMax BaseStation Sectors:
Rocket M and AirMax BaseStation/Rocket Antennas have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the Antennas.

Product Links:
Datasheet	Product Page

Antenna and Electrical characteristics
Frequency Range	5.15-5.85 GHz
Gain	18.6-19.1 dBi
Polarization	Dual Linear
Cross-Pol Isolation	28dB min
Max VSWR	1.5:1
Hpol Beamwidth (6dB)	123 deg.
Vpol Beamwidth (6db)	123 deg.
Elevation Beamwidth	4 deg.
Electrical Downtilt	2 deg.
ETSI Specification	EN302 326 DN2
Dimensions	700x145x93mm
Weight	5.9Kgr
Windloading	160mph

World Class Antenna Designs :
Patent-pending next-generation technology achieves gain, cross-pol isolation, and beamshaping characteristics rivaling the highest quality cellular carrier basestation antennas in the world. Instantly pair with Rocket M5 to create a powerful AirMax 2x2 MIMO PtMP BaseStation. Rocket mount and weatherproof RF jumpers included.

Rocket M Seamlessly Integrates with AirMax BaseStation Sectors:
Rocket M and AirMax BaseStation/Rocket Antennas have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the Antennas.

Product Links:
Datasheet	Product Page

Antenna and Electrical characteristics
Frequency Range	5.15-5.85 GHz
Gain	19.4-20.3 dBi
Polarization	Dual Linear
Cross-Pol Isolation	28dB min
Max VSWR	1.5:1
Hpol Beamwidth (6dB)	91 deg.
Vpol Beamwidth (6db)	85 deg.
Elevation Beamwidth	4 deg.
Electrical Downtilt	2 deg.
ETSI Specification	EN302 326 DN2
Dimensions	700x145x93mm
Weight	5.9Kgr
Windloading	160mph

Performance Breakthrough :
150+ Mbps real outdoor throughput and up to 15km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.

New Leading-Edge Industrial Design:
The original NanoStation set the bar for the world's first low-cost and efficiently designed outdoor broadband CPE. The new NanoStation M and NanoStation Loco M take the same concept to the future with new redesigned sleek and elegant form-factors.

Next-Gen Antenna Design:
New antenna array designs featuring 16dBi dual-polarity gain at 5GHz and 11dBi dual-polarity 11dBi at 2.4GHz. Both with optimized cross-polarity isolation and in a compact form-factor.

Dual Ethernet Connectivity:
The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.

Intelligent POE:
Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location. In addition, any NanoStation can easily become 802.3af 48V compliant through use of Ubiquiti's Instant 802.3af adapter.

AirOS V:
Version 5 of Ubiquiti's AirOS builds upon the market leading intuitive user-interface loaded with advanced wireless configurations and routing functionality.

Product Links:
Datasheet	Manual	Support Page	Product Page

System Information :
Processor Specs	Atheros MIPS 24KC, 400MHz
Memory Information	32MB SDRAM, 8MB Flash
Networking Interface	2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
Regulatory / Compliance information :
Wireless Approvals	FCC Part 15.247, IC RS210, CE
RoHS Compliance	YES
Physical - Electrical - Environmental :
Enclosure Size	29.4 cm x 8 cm x 3cm
Weight	0.4kg
Enclosure Characteristics	Outdoor UV Stabalized Plastic
Mounting Kit	Pole Mounting Kit included
Max Power Consumption	8 Watts
Power Supply	15V, 0.8A surge portection integrated POE adapter included
Power Method	Passive Power over Ethernet (pairs 4,5+; 7,8 return)
Operating Temperature	-30C to +80C
Operating Humidity	5 to 95% Condensing
Shock and Vibration	ETSI300-019-1.4
INTEGRATED 2x2 MIMO ANTENNA :
Frequency Range	4.9-5.9 GHz
Gain	14.6-16.1dBi
Polarization	Dual Linear
Cross-pol Isolation	22dB minimum
Max VSWR	1.6:1
H-pol Beamwidth	43 deg.
V-pol Beamwidth	41 deg.
Elevation Beamwidth	15 deg.

100Mbps+ Speed with no Special Antenna Required
The Bullet M series can be paired with any antenna to deliver 100Mbps+ of real TCP/IP speed over the air. The first cost-effective outdoor device in the world to do so.

AirOS V
AirOS V firmware builds upon Ubiquiti's widely praised intuitive and powerful interface. It now features even more powerful wireless configuration and routing functionality.

Zero-Variable Wireless Infrastructure Deployment .
• No radio card / host board issues
• No RF cable quality concerns
• No mechanical stability concerns 
• No enclosure mounting requirements 

Just Plug and Go.

Product Links:
Datasheet	AirOS Manual	Support Page
Product Page

100Mbps+ Speed with no Special Antenna Required
The Bullet M series can be paired with any antenna to deliver 100Mbps+ of real TCP/IP speed over the air. The first cost-effective outdoor device in the world to do so.

AirOS V
AirOS V firmware builds upon Ubiquiti's widely praised intuitive and powerful interface. It now features even more powerful wireless configuration and routing functionality.

Zero-Variable Wireless Infrastructure Deployment .
• No radio card / host board issues
• No RF cable quality concerns
• No mechanical stability concerns 
• No enclosure mounting requirements 

Just Plug and Go.

Product Links:
Datasheet	AirOS Manual	Support Page
Product Page

Instantly transform any antenna into a carrier class radio system.

Zero-Variable Wireless Infrastructure Deployment

• No radio card / host board issues
• No RF cable quality concerns
• No mechanical stability concerns 
• No enclosure mounting requirements

Just Plug and Go.

Featuring Powerful AirOS Software and Linux SDK
Bullet ships standard with the powerful and intuitive AirOS by Ubiquiti Networks. It also is supported by a Linux SDK to encourage open source development.

Reliable System Performance
The Bullet features a signal strength LED meter for antenna alignment, a low-loss integrated N-type RF connector, and a quick and robust weatherproof design.

Product Links:
Datasheet	AirOS Manual	Support Page

Live Demo
(login: ubntdemo)

The device designed to advance the Global Wireless ISP industry to the next level. Featuring a compact indoor/outdoor design and an interface so intuitive even the most technically challenged can instantly become experts. But, don't be fooled; it is as powerful as it is simple. Nanostation packs some phenomenal performance with a revolutionary design combining a hi-gain 4 antenna system, advanced radio architecture, and highly researched and developed firmware technology allowing throughput, stability, and capacity performance rivaling even the highest-end WiMax networks.

Product Links:
Datasheet	Manual	Support Page

Live Demo
(login: ubntdemo)