|
 |
| |
 |
 |
802.11g Hi Power Multifunction AP/Router |
|
| |
 |
 |
AP, Client, Bridge, WDS, Universal Repeater, WISP, Gateway 8-Modes |
|
| |
 |
 |
Detachable Antenna with R-SMA connector |
|
| |
 |
 |
Bandwidth Control and Antenna Alignment Signal Survey |
|
| |
 |
 |
Wireless Client Isolation, Watchdog, ACK Timeout, TX power adjustable, Telnet |
|
| |
 |
 |
Up to 27dBm Output Power(South America) and -96dBm RSSI |
|
|
| |
|
5-port Hi-Power AP
|
 |
he WL-5470AP is a multi-function AP designed for various different wireless applications. On the hardware side, it features 5 LAN ports and hardware hi-power amplifier that can boost the output power from standard 18dBm to over 25dBm*. On the software front, the WL-5470AP includes both powerful features and an easy-to-use interface to satisfy the demand of WISP operators, Home, or Office users. |
|
| |
|
8 Wireless Operating Modes
|
|
 |
 |
| WDS Site Survey and Universal Site Survey |
|
The WL-5470AP adds WDS and Universal Site Survey to make bridge and repeater configuration much easier. Now you no longer have to look around for remote AP’s MAC address to establish a bridge connection.
|
|
 |
| Boot loader Protection |
|
The WL-5470AP feature the boot loader protection. Even if the machine’s firmware crashed during firmware upgrade, the users can still recover the AP. This makes WL-5470AP much more reliable than other Realtek 8186 based AP.
|
|
 |
|
Wireless Client Isolation
|
|
The WL-5470AP features the new Wireless Client Isolation function previous available only in more expensive APs. When you enable this function, the wireless clients will not be able to see each other. Therefore, it is an important function for office and Hotspot operator to protect the security between different wireless users.
|
|
 |
|
ACK Timeout and TX Power Regulation
|
|
The WL-5470AP features ACK timeout function to let you adjust the timeout value for long distance operation. In addition, 5-level TX power adjustment let you match different antennas for law compliance. The ability to set lower TX output power is also crucial if you want to match the AP with external power amplifier.
|
|
 |
|
Extended Security Features
|
|
The WL-5470AP support WEP, WPA and WPA2 security functions. In addition, WPA enterprise for 802.1x authenticator are featured for AP and WDS mode. The combination of Encryption, Hide SSID and Access Control ensures your wireless network is completely secured from intruder.
The WL-5470AP’s firmware features list are much longer than what has been described. Better yet, OvisLink Corp. are known to continuous upgrade the firmware for new features. Whether it's for WISP, Hotspot, or Home uses, the WL-5470AP is perfect for everyone.
|
|
| |
|
* The TX output power is limited to 20dBm in EU, 23dBm in U.S., and 27dBm in South America
|
|
 |
Feature |
AP, Bridge, Client, Repeater functions
Router and Gateway mode
WISP Client Router mode
WISP + Universal Repeater Mode
Up to 25dBm output power
Hardware Power Amplifier
Detachable Antenna, 5 LAN ports
802.1x, WPA, WPA2 and Web Mgt.
TX power regulation in 4 levels
Watchdog function use PING
Wireless Client Isolation
WDS Site Survey
ACK Timeout Adjustment
DHCP Relay function
802.11g Protection
MAC Access Control
Telnet |
Hardware |
5 x 10/100Mbps LAN Port
2MB Flash, 16MB SDRAM
Reversed SMA Antenna Port
Power, LAN, WLAN LED indicators |
Antenna |
2 dBi detachable Dipole Antenna
Reversed SMA Connector |
WISP Mode |
DHCP, PPTP, L2TP, PPPoE ISP Authentication Support
Wireless Client function as WAN
To configure the WISP mode, you PC must be connected to the LAN port |
Gateway Mode |
1 WAN and 4 LAN ports
NAT Routing between WAN and LAN port
Wireless used for LAN side
Virtual Server, MAC filtering, DMZ, Firewall, IP filtering functions
|
Security |
64/128-bit
802.1x Radius Support
WPA/WPA2-PSK support
WPA Enterprise support in AP/WDS mode
|
Configuration |
Web Management
WDS (Bridge, Client, Repeater) mode
Hide ESSID
802.1x
|
Frequency Range |
USA (FCC) 11 Channels: 2.412GHz~2.462GHz
Europe (ETSI) 13 Channels : 2.412GHz~2.472GHz |
Receiver Senstivity |
IEEE 802.11b
|
Min (dBm)
|
1Mbps
|
-96
|
|
2Mbps
|
-94
|
|
5Mbps
|
-93
|
|
11Mbps
|
-89
|
|
IEEE 802.11g
|
Min (dBm)
|
6Mbps
|
-89
|
|
9Mbps
|
-89
|
|
12Mbps
|
-87
|
|
18Mbps
|
-86
|
|
24Mbps
|
-83
|
|
36Mbps
|
-80
|
|
48Mbps
|
-75
|
|
54Mbps
|
-72
|
Modulation Technique |
11g Orthogonal Frequency Division Multiplexing (64QAM, 16QAM, QPSK,
BPSK)
11b Direct Sequence Spread Spectrum (CCK, DQPSK, DBPSK)
Data Rate: 54, 48, 36, 24, 18,11, 5.5, 2, 1 Mbps |
Output Power |
20dBm(EU), 23dBm(FCC), 26dBm(South America)
Adjustable in 7 levels
MAC Access Control
MAC Access Table
Wireless Client Isolation (e8 firmware)
SSID, Channel, RTS Threshold, Frag Threshold
|
Environmental |
Operating temperature: 0~60 ℃; Operating humidity (non-condensing):
20~80%
Storage temperature: -20~65 ℃
Storage humidity: 95% Max
|
Power Supply |
DC12V |
EMI |
FCC, CE |
Product Weight (g) |
236 g |
Product Size
( L x W x H (mm) ) |
160 x 115 x 30 mm |
|
 |
|
| |
Feature |
AP, Bridge, Client, Repeater functions
Router and Gateway mode
WISP Client Router mode
WISP + Universal Repeater Mode
Up to 25dBm output power
Hardware Power Amplifier
Detachable Antenna, 5 LAN ports
802.1x, WPA, WPA2 and Web Mgt.
TX power regulation in 4 levels
Watchdog function use PING
Wireless Client Isolation
WDS Site Survey
ACK Timeout Adjustment
DHCP Relay function
802.11g Protection
MAC Access Control
Telnet |
Hardware |
5 x 10/100Mbps LAN Port
2MB Flash, 16MB SDRAM
Reversed SMA Antenna Port
Power, LAN, WLAN LED indicators |
Antenna |
2 dBi detachable Dipole Antenna
Reversed SMA Connector |
WISP Mode |
DHCP, PPTP, L2TP, PPPoE ISP Authentication Support
Wireless Client function as WAN
To configure the WISP mode, you PC must be connected to the LAN port |
Gateway Mode |
1 WAN and 4 LAN ports
NAT Routing between WAN and LAN port
Wireless used for LAN side
Virtual Server, MAC filtering, DMZ, Firewall, IP filtering functions
|
Security |
64/128-bit
802.1x Radius Support
WPA/WPA2-PSK support
WPA Enterprise support in AP/WDS mode
|
Configuration |
Web Management
WDS (Bridge, Client, Repeater) mode
Hide ESSID
802.1x
|
Frequency Range |
|
|
Services
Installation, Support: - Hot Spot hotels, conference centers, marinas. - Wireless long distance radio links. - Call Centers VoIP. - Systems CCTV, IP Cameras, Internet Video Streaming.
Contact Us
|