The PowerBeam ac ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ac ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. The big advantage of this housing is its easy installation (one bolt).
Ubiquiti InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.
Providing high performance and innovative mechanical design at a low cost, the PowerBeam ac ISO is extremely versatile and cost‑effective to deploy.
| Antenna Gain | 27 dBi |
| Dimensions | 564 x 564 x 308 mm |
| Enclosure | Outdoor UV Stabilized Plastic |
| LED'S | 1) Power, (1) LAN, (4) WLAN |
| Max Power consumption | 8W |
| Max. VSWR | 1.5:1 |
| Memory | 128 MB DDR2, 16 MB Flash |
| Mounting | Pole-Mount Kit Included |
| Networking Interface | 10/100/1000 Ethernet Port |
| Operating Frequency | 5150 - 5875 MHz |
| Operating Humidity | 5 to 95% Noncondensing |
| Operating Temperature | -40 to 70° C (-40 to 158° F |
| Polarization | Dual Linear |
| Power Method | Passive PoE |
| Power Supply | 24V, 0.5A Gigabit PoE |
| Processor Specs | Atheros MIPS 74Kc, 720 MHz |
| RoHS Compliance | Yes |
| Salt Fog Test | IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 |
| Supported Voltage Range | 20-26VDC |
| Temperature Shock Test | IEC 68-2-14 |
| Vibration Test | IEC 68-2-6 |
| Weight | 5.2 kg |
| Wind Loading | 984 N @ 200 km/h (221.2 lbf @ 125 mph |
| Wind Survivability | 200 km/h (125 mph) |
| Wireless Approvals | FCC, IC, CE |
